1. Once the switch is in the stationary state, as shown in (ON) below the level of the conclusion of 15 degrees, the switch is in the ON state;
2. When (OFF) side under the level of 15 degrees, the switch is in OFF state;
3. When exposed to outside vibration forces and vibration reached, or when the conduction angle is set in the scope, the reflective pin electrical characteristics will produce short or continuous conduction
4. After the switch is OFF side angle of 15 degrees below the horizontal, while vibration difficult to trigger conduction;
5. The trigger switch for reduced current circuit, does not apply when the electricity switch;
6.,This switch is a sealed package, dustproof, waterproof;
7. When you want to restore the electrical characteristics of the open state (OFF), switch to set the environment must be inactive, and (OFF) below the level required to set up the open end angle.